Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

Identificadores
URI: http://hdl.handle.net/10498/26579
DOI: 10.1016/j.corsci.2022.110273
ISSN: 0010-938X
Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2022-06Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
Corrosion Science 201 (2022) 110273Resumen
Localized corrosion of Scalmalloy® processed by Selective Laser Melting (SLM) under certified conditions is
studied and correlated with the intermetallic particles present in the microstructure. Two types of samples are
considered: as-built and heat-treated samples. The heat treatment does not modify the pitting corrosion per-
formance. All samples exhibit two groups of pits with different repassivation behaviour. Si-bearing and Fe-
bearing phases produce pitting, while Al(Sc,Zr) is not found to be important. The two types of samples are
resistant to intergranular corrosion (IGC) according to ASTM G67 thanks to the low content of β phase. However,
the heat-treatment slightly increases the IGC-susceptibility.
Materias
aluminium; SEM; TEM; weight loss; pitting corrosion; intergranular corrosionColecciones
- Artículos Científicos [12077]
- Articulos Científicos CC. Mat. [585]
- Artículos Científicos IMEYMAT [581]






