Effect of Wood Properties and Building Construction on Thermal Performance of Radiant Floor Heating Worldwide

Files
Statistics
Metrics and citations
Metadata
Show full item recordDate
2022-06Department
Máquinas y Motores TérmicosSource
Appl. Sci. 2022, 12, 5427Abstract
Due to its relatively lower thermal conductivity, the suitability of wood is called into
question when selecting the flooring material best suited to radiant heating systems. The European
standard EN 1264 considers floorings with a thermal resistance over 0.15 m2 K/W to be out of scope.
This belief was partially disproved in a previous article that studied wooden floors for Madrid’s
climate. However, the effect of climate still needs to be addressed. The present study extends the
previous research to worldwide climates and aimed to answer the following questions: (1) Do the
lowest thermal conductivity woods present good thermal performance when used in radiant floors?
(2) Should the flooring have a maximum thermal resistance value? (3) Is the standard thermal
resistance limit of 0.15 m2 K/W objectively justified? And (4) Do the answers of the preceding
questions depend on the climate and the construction characteristics? To answer these questions,
28 cities were selected according to the Köppen–Geiger climate classification. In each city, 216 different
dwellings were simulated with 60 wood floorings and one of low thermal resistance as a reference,
comprising a total of 368,928 cases. Thermal performance was evaluated in terms of three parameters:
energy demand, thermal comfort, and start-up lag time. Consequently, the answers to the previous
questions were: (1) The lowest thermal conductivity woods can be used efficiently worldwide in
radiant floor heating systems with start-up lag times close to that of the reference flooring; (2) There
is no limit value for thermal resistance for floorings that can be applied to all dwellings and climates;
(3) No objective justification was found for establishing a thermal resistance limit for flooring of
0.15 m2 K/W; and (4) Climate and construction characteristics can play an important role in the
correct selection of flooring properties, especially in severe winters and dwellings with the greatest
outdoor-exposed envelope and the worst insulation.
Subjects
wooden radiant floors worldwide; energy efficiency of buildings; thermal comfort; effect of thermal properties of wood; natural stone vs. wooden radiant floorsCollections
- Artículos Científicos [11777]
- Articulos Científicos Maq. Mot. Térm. [108]






