Catalytic Hydrothermal Treatment for the Recycling of Composite Materials from the Aeronautics Industry

Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2024-11Departamento/s
Ingeniería Química y Tecnología de AlimentosFuente
Applied Sciences (Switzerland), Volume 14, Issue 21, Article number 9874Resumen
Epoxy resin composite matrices reinforced with carbon fibers are highly demanded by certain industries such as the aeronautics industry because of their exceptional mechanical properties. Unfortunately, the use of reinforcing carbon fibers makes these composite materials hard to recycle by conventional methods. Therefore, in this study, specific hydrothermal treatments have been employed to recover carbon fibers from the offcuts of composite parts from the aeronautics industry. The resin decomposition rates (DRs) achieved by different settings of the operating parameters, such as the use of alkaline catalysts (KOH, NaOH, or K2CO3), the application of mechanical stirring, the use of different reaction times, the solvent volume/composite mass ratio, the specific surface area (surface area/mass) of the composite pieces, and the operating temperature and pressure (subcritical or supercritical conditions), have been examined and assessed. Under the conditions that have been evaluated, resin decomposition rates nearly as high as 98% have been achieved, while the recycled fibers retained over 95% of their original tensile strength (TS).
Materias
carbon fiber; catalyst; epoxy resin; hydrothermal processes; recyclingColecciones
- Artículos Científicos [12009]





