• español
    • English
  • Login
  • español 
    • español
    • English

UniversidaddeCádiz

Área de Biblioteca, Archivo y Publicaciones
Comunidades y colecciones
Ver ítem 
  •   RODIN Principal
  • Producción Científica
  • Artículos Científicos
  • Ver ítem
  •   RODIN Principal
  • Producción Científica
  • Artículos Científicos
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Tribological Analysis of Fused Filament Fabrication PETG Parts Coated with IGUS

Thumbnail
Identificadores

URI: http://hdl.handle.net/10498/35738

DOI: 10.3390/app14167161

ISSN: 2076-3417

Ficheros
OA_2024_1064.pdf (6.681Mb)
Estadísticas
Ver estadísticas
Métricas y Citas
 
Compartir
Exportar a
Exportar a MendeleyRefworksEndNoteBibTexRIS
Metadatos
Mostrar el registro completo del ítem
Autor/es
Batista Ponce, MoisésAutoridad UCA; Tenorio, D.; Sol Illana, Irene delAutoridad UCA; Vázquez Martínez, Juan ManuelAutoridad UCA
Fecha
2024-08-15
Departamento/s
Ingeniería Mecánica y Diseño Industrial
Fuente
Applied Sciences (Switzerland), Vol. 14, Núm. 16, 2024
Resumen
This paper studied the tribological behaviour of parts manufactured using fused filament fabrication (FFF) technology with PETG (polyethylene terephthalate glycol) coated with IGUS tribological filaments. The research focuses on analysing how these multi-material parts behave under different loads. The objective of this study is to evaluate the wear resistance and friction coefficient of parts coated with different thicknesses of IGUS material. The methodology employs pin-on-disc (PoD) tribological tests to measure behaviour under various load conditions and coating thicknesses. The results indicate that increasing the coating thickness improves surface stability and reduces roughness, although it does not significantly affect the average friction coefficient. This research concludes that coating thickness has a moderate impact on surface quality and that the applied load significantly influences the depth and width of the wear groove. This contribution is valuable for the field of additive manufacturing as it provides a better understanding of how to optimise the tribological properties of parts manufactured using FFF, which is crucial for industrial applications where wear and friction are critical factors. The practical application includes the potential improvement of components in the automotive and aerospace industries.
Materias
additive manufacturing; tribology; FFF; wear resistance; PLA; PETG; IGUS
Colecciones
  • Artículos Científicos [12059]
  • Articulos Científicos Ing. Mec. [327]
Atribución 4.0 Internacional
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional

Listar

Todo RODINComunidades y ColeccionesPor fecha de publicaciónAutoresTítulosMateriasEsta colecciónPor fecha de publicaciónAutoresTítulosMaterias

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Información adicional

Acerca de...Deposita en RODINPolíticasNormativasDerechos de autorEnlaces de interésEstadísticasNovedadesPreguntas frecuentes

RODIN está accesible a través de

OpenAIREOAIsterRecolectaHispanaEuropeanaBaseDARTOATDGoogle Académico

Enlaces de interés

Sherpa/RomeoDulcineaROAROpenDOARCreative CommonsORCID

RODIN está gestionado por el Área de Biblioteca, Archivo y Publicaciones de la Universidad de Cádiz

ContactoSugerenciasAtención al Usuario