Phosphogypsum leachate cleaning waste as partial cement replacement in mortars

Identificadores
URI: http://hdl.handle.net/10498/37850
DOI: 10.1016/j.rineng.2025.107913
ISSN: 2590-1230
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2025-12Departamento/s
Física AplicadaFuente
Results in Engineering, Volume 28, 2025, 107913Resumen
This study presents the first valorisation of a waste generated from the cleaning process of phosphogypsum leachate. Leachate decontamination waste (LDW), which contains non-negligible concentrations of heavy metals, radionuclides and fluorine, was used as a partial cement replacement in mortars at varying proportions. New cements and mortars were produced from mixtures of a commercial Portland cement (CEM I 52.5) with different concentrations of this waste (2.5, 5, 7.5, 10, 25 and 35 wt.%).
The physical-chemical properties, mechanical behaviour, and environmental impact of these LDW-cement mortars were evaluated. The results revealed that incorporating LDW at levels of up to 10% not only maintained but even enhanced the mechanical properties compared to the reference mortar. Furthermore, the cement matrix effectively immobilized potential contaminants in all cases, contributing to environmental safety.
Materias
Phosphogypsum leachate treatment; Cement mortars; Leaching test; Technical properties; Heavy metals immobilisationColecciones
- Artículos Científicos [12034]
- Articulos Científicos Fis. Ap. [318]






