Environmentally friendly analysis of emerging contaminants by pressurized hot water extraction-stir bar sorptive extraction-derivatization and gas chromatography-mass spectrometry

Abstract

This work describes the development, optimiza- tion, and validation of a new method for the simultaneous determination of a wide range of pharmaceuticals (beta- blockers, lipid regulators ... ) and personal care products (fragrances, UV filters, phthalates ... ) in both aqueous and solid environmental matrices. Target compounds were extracted from sediments using pressurized hot water ex- traction followed by stir bar sorptive extraction. The first stage was performed at 1,500 psi during three static extrac- tion cycles of 5 min each after optimizing the extraction temperature (50 – 150 °C) and addition of organic modifiers (% methanol) to water, the extraction solvent. Next, aqueous extracts and water samples were processed using polydime- thylsiloxane bars. Several parameters were optimized for this technique, including extraction and desorption time, ionic strength, presence of organic modifiers, and pH. Fi- nally, analytes were extracted from the bars by ultrasonic irradiation using a reduced amount of solvent (0.2 mL) prior to derivatization and gas chromatography – mass spectrome- try analysis. The optimized protocol uses minimal amounts of organic solvents (<10 mL/sample) and time ( ≈ 8 h/sam- ple) compared to previous ex isting methodologies. Low standard deviation (usually below 10 %) and limits of de- tection (sub-ppb) vouch for the applicability of the method- ology for the analysis of target compounds at trace levels. Once developed, the method was applied to determine