Energy-Efficient Envelope Design for Apartment Blocks—Case Study of A Residential Building in Spain

Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2021-01-04Departamento/s
Máquinas y Motores TérmicosFuente
Appl. Sci. 2021, 11, 433.Resumen
Buildings are known to be responsible for about a third of energy consumption in developed
countries. This situation, together with the fact that the existing building stock is being renovated
at a very slow pace, makes it crucial to focus on the energy retrofitting of buildings as the only
way to reduce their contribution to these energy consumptions and the consequences derived from
them in terms of pollution and climate change. The same level of insulation and the same type of
windows is usually proposed for all dwellings in a building block. This article shows that since
the improvements required by each dwelling in the same block are different, the proposed solution
must also be different. The methodology is proposed for a practical case consisting of an apartment
block in Cádiz, a demonstration building of the European RECO2ST project. To achieve the optimum
solution for each case, a multi-objective optimization problem is solved: to minimize the annual
heating demand of the building and the standard deviation of the annual demand of the different
dwellings. Thanks to the use of the proposed methodology, it is possible to bring the building
to a Nearly Zero Energy Building (NZEB) level, while avoiding excessive insulation that causes
overheating in summer.
Materias
Evaporative cooling; Building renovation; Energy savings in buildings; nZEBColecciones
- Artículos Científicos [12014]
- Articulos Científicos Maq. Mot. Térm. [109]





