• español
    • English
  • Login
  • español 
    • español
    • English

UniversidaddeCádiz

Área de Biblioteca, Archivo y Publicaciones
Comunidades y colecciones
Ver ítem 
  •   RODIN Principal
  • Producción Científica
  • Artículos Científicos
  • Ver ítem
  •   RODIN Principal
  • Producción Científica
  • Artículos Científicos
  • Ver ítem
JavaScript is disabled for your browser. Some features of this site may not work without it.

Effect of fast heating and cooling in the hydrothermal synthesis on LiFePO4 microparticles

Identificadores

URI: http://hdl.handle.net/10498/30954

DOI: 10.1021/ACS.IECR.0C00518

ISSN: 1520-5045

Ficheros
Acceso cerrado (7.420Mb)
Estadísticas
Ver estadísticas
Métricas y Citas
 
Compartir
Exportar a
Exportar a MendeleyRefworksEndNoteBibTexRIS
Metadatos
Mostrar el registro completo del ítem
Autor/es
Ruiz Jorge, Francisco; Benítez, A.; Fernández García, SusanaAutoridad UCA; Sánchez Oneto, JezabelAutoridad UCA; Portela Miguélez, Juan RamónAutoridad UCA
Fecha
2020-04-21
Departamento/s
Ingeniería Química y Tecnología de Alimentos
Fuente
Ind. Eng. Chem. Res. 2020, 59, 9318-9327
Resumen
Hydrothermal synthesis is a chemical process that has gained much interest in recent years, especially for the synthesis of LiFePO4 since it is a method that requires a relatively low temperature, short reaction time, and it is reproducible. In this work, LiFePO4 microparticles have been synthesized by means of a fast heating system (sand bath) under hydrothermal conditions. The experiments have been carried out under two different heating rates (86 °C/min and 5.26 °C/min), two different residence times (5 and 30 min), and two different cooling rates (−455 °C/min and −8 °C/min). The effects that these three parameters had on the synthesized particles were verified using several techniques such as X-ray diffraction and scanning electron microscopy. It was observed that the heating rate had a great influence on the purity, crystallization, and morphology of the synthesized LiFePO4 particles. In addition, the high influence of cooling rate on the crystallization and morphology of the particles was also analyzed.
Materias
LiFePO4; Hydrothermal systhesis; Lithium-ion batteries
Colecciones
  • Artículos Científicos [12014]
  • Articulos Científicos Ing. Quim. [313]

Listar

Todo RODINComunidades y ColeccionesPor fecha de publicaciónAutoresTítulosMateriasEsta colecciónPor fecha de publicaciónAutoresTítulosMaterias

Mi cuenta

AccederRegistro

Estadísticas

Ver Estadísticas de uso

Información adicional

Acerca de...Deposita en RODINPolíticasNormativasDerechos de autorEnlaces de interésEstadísticasNovedadesPreguntas frecuentes

RODIN está accesible a través de

OpenAIREOAIsterRecolectaHispanaEuropeanaBaseDARTOATDGoogle Académico

Enlaces de interés

Sherpa/RomeoDulcineaROAROpenDOARCreative CommonsORCID

RODIN está gestionado por el Área de Biblioteca, Archivo y Publicaciones de la Universidad de Cádiz

ContactoSugerenciasAtención al Usuario