A Combined Microscopy Study of the Microstructural Evolution of Ferritic Stainless Steel upon Deep Drawing: The Role of Alloy Composition

Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2024Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
Journal of Manufacturing and Materials Processing - 2024, Vol. 8 n. 1 pp. 1-14Resumen
Ferritic stainless steel (FSS) is widely used to manufacture deep-drawn products for
corrosion resistance applications, being the alloy drawability strongly affected by its microstructural
anisotropy. This study combines a variety of microscopy techniques enabling in-depth analyses of the
microstructural evolution of two different FSSs correlated to their deep drawing performance. One of
the steels has a good correspondence with the standard EN-1.4016 (AISI 430). The other is a modified
version of the previous one with higher contents of the ferrite-stabilising elements Si and Cr, and
lower contents of the austenite-stabilising elements C, N, and Mn. Electron Backscatter Diffraction
results confirm that the microstructural properties and drawability of FSS in the deep drawing
process are improved in the modified steel version. Scanning transmission electron microscopy under
low-angle annular dark field conditions evidences that the deformation mechanism of FSS during
deep drawing follows a microstructural distortion model based on the grain size gradient and shows
a variation of the deformation texture depending on the alloy composition. This work demonstrates
the potential of advanced microscopy techniques for optimising the processing and design of ferritic
stainless steels, with slight variations in the alloy composition, for deep drawing applications.
Materias
ferritic stainless steel; recrystallisation texture; deep drawing; deformation texture; EBSD; STEMColecciones
- Artículos Científicos [12009]
- Articulos Científicos CC. Mat. [579]
- Artículos Científicos IMEYMAT [578]






