Development of porous asphalt with bitumen emulsion, electric arc furnace slag and cellulose fibers for medium traffic roads

Abstract

The construction of road infrastructure is one of the most polluting activities that exists today. Therefore, the use of waste from other industries is an excellent solution, since it reduces the consumption of raw materials, reduces CO2 emissions and avoids the disposal of waste in a landfill. In this study, electric arc furnace slag, cellulose fibers from the papermaking industry and bitumen emulsion were used for the conformation of sustainable and porous bituminous mixtures. Electric arc furnace slag was used as a high-resistance aggregate with a capacity sufficient to support traffic loads. Cellulose fibers were added to increase the percentage of binder in the mixture without bleeding problems, thereby achieving greater tensile strength. To do this, first the waste was physically and chemically characterized, then different mixtures were conformed and finally the mixtures were studied by means of the loss by wear and Marshall tests. The results reflected an optimal combination of materials that provided the best results in the mechanical tests, obtaining much better results than the mixtures with discontinuous grading and traditional bitumen emulsion. Therefore, a sustainable, porous and economical mixture for road use is obtained in this research.