Full-scale friction welding system for pipeline steels

Identificadores
URI: http://hdl.handle.net/10498/38755
DOI: 10.1016/j.jmrt.2018.12.007
ISSN: 2238-7854
Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2019Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
Journal of Materials Research and Technology, Vol. 8, Núm. 2, 2019, pp. 1773-1780Resumen
A fully automatic friction welding system was specially developed for the girth friction welding of pipelines with a diameter of up to 400 mm. The friction welding methods were solid-state joining processes based on the generation of heat through the contact and rotation of an intermediate ring placed between two pipes ends. The thermomechanical process used in this non-fusion method generated different welding zones and microstructures. This resulted in the production of defect-free API 5L X46 welded pipes in less than 5 min. The microhardness profile of the welded joints showed an increase in the intermediate ring hardness. A fracture toughness test and fractographic analyses showed reduced values in the centre of the ring, which were associated with dimples nucleated at small inclusions.
Materias
Friction welding system; Pipeline girth welds; API 5L steelColecciones
- Artículos Científicos [12014]
- Articulos Científicos CC. Mat. [579]
- Artículos Científicos IMEYMAT [578]





