Study of the Tool Wear Process in the Dry Turning of Al–Cu Alloy

Abstract

Light alloy machining is a widely implemented process that is usually used in the presence of cutting fluids to reduce wear and increase tool life. The use of coolants during machining presents negative environmental impacts, which has increased interest in reducing and even eliminating their use. In order to obtain ecofriendly machining processes, it will be necessary to suppress the use of cutting fluids, in a trend called “dry machining”. This fact forces machines to work under aggressive cutting conditions, producing adhesion wear that a ects the integrity of the parts’ surfaces. This study describes cutting tool wear mechanisms in machining of UNS A92024 samples under dry cutting conditions. Energy dispersive spectroscopy (EDS) analysis shows the di erent compositions of the adhered layers. Roughness is also positively a ected by the change of the cutting geometry produced in the tool.