Feasibility of exhausted sugar beet pulp as raw material for lactic acid production

Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2020-02-14Departamento/s
Ingeniería Química y Tecnología de AlimentosResumen
Exhausted sugar beet pulp pellets (ESBPP), a sugar industry by-product generated after sugar extraction in the sugar production process, have been used as a raw material for lactic acid (LA) production via hydrolysis and fermentation by Lactobacillus casei. The present study proposes simultaneous saccharification and fermentation (SSF) of ESBPP to design a more cost-effective process. The effects of pH control, nutrient supplementation and solid addition in fed-batch SSF on lactic acid production were investigated.
RESULTS
The highest LA concentration (26.88 g L–1) was reached in fed-batch SSF at a solid/liquid loading of 0.2 g mL–1, with pH control (by adding 30 g L–1 CaCO3 to the medium) and nutrient supplementation (by adding 20 mL of MRS medium per 100 mL of buffer). Under these conditions, a maximum productivity of 0.63 g L−1 h−1 was achieved, 2.7 times higher than that of the control experiment (SSF inoculated at time 0 h). However, a slightly lower LA yield was obtained, revealing the need for an increasing dose of enzymes at high solid-loading SSF.
CONCLUSION
An efficient fed-batch SSF strategy with pH control and MRS supplementation is described in the present study, attaining higher LA productivity compared to separate hydrolysis and fermentation and SSF.
Materias
Sugar beet pulp; simultaneous saccharification and fermentation; lactic acid; pH control; fed-batch SSFColecciones
- Artículos Científicos [12059]
- Articulos Científicos Ing. Quim. [314]
- Artículos Científicos IVAGRO [737]






