Exploring the Implementation of GaAsBi Alloys as Strain-Reducing Layers in InAs/GaAs Quantum Dots

Ficheros
Estadísticas
Métricas y Citas
Metadatos
Mostrar el registro completo del ítemFecha
2024Departamento/s
Ciencia de los Materiales e Ingeniería Metalúrgica y Química InorgánicaFuente
Nanomaterials - 2024, Vol. 14 n. 4 pp. 1-13Resumen
This paper investigates the effect of GaAsBi strain reduction layers (SRLs) on InAs QDs
with different Bi fluxes to achieve nanostructures with improved temperature stability. The SRLs are
grown at a lower temperature (370 ◦C) than the usual capping temperature for InAs QDs (510 ◦C).
The study finds that GaAs capping at low temperatures reduces QD decomposition and leads to
larger pyramidal dots but also increases the threading dislocation (TD) density. When adding Bi to the
capping layer, a significant reduction in TD density is observed, but unexpected structural changes
also occur. Increasing the Bi flux does not increase the Bi content but rather the layer thickness. The
maximum Bi content for all layers is 2.4%. A higher Bi flux causes earlier Bi incorporation, along with
the formation of an additional InGaAs layer above the GaAsBi layer due to In segregation from QD
erosion. Additionally, the implementation of GaAsBi SRLs results in smaller dots due to enhanced
QD decomposition, which is contrary to the expected function of an SRL. No droplets were detected
on the surface of any sample, but we did observe regions of horizontal nanowires within the epilayers
for the Bi-rich samples, indicating nanoparticle formation.
Materias
GaAsBi capping; self-assembled InAs QDs; STEM compositional analysesColecciones
- Artículos Científicos [12034]
- Articulos Científicos CC. Mat. [585]
- Artículos Científicos IMEYMAT [581]






